| rpm function |
Range : 60 to 100,000 rpm
Resolution : 0.006 to 6 according calibre
Accuracy : 1 x 10-4 of reading ± 6 counts |
| m/min function |
Range : 6 to 10,000 m/min
Resolution : 0.006 to 6 depending on calibre
Accuracy : 1 x 10-4 reading ± 1 increment |
| Hz function |
Range : 1 to 10,000 Hz
Resolution : 0.004 to 0.4 depending on calibre
Accuracy : 4 x 10-5 of reading ± 4 counts |
| ms function |
Range : 0.1 to 1,000 ms
Resolution : 0.0003 to 0.03 depending on calibre
Accuracy : 1 x 10-4 of reading ± 5 counts |
| Duty cycle function |
Range : 0.1 to 100%
Resolution : 0.1 to 1 % depending on calibre
Accuracy : 0.1 % of scale from 0.2 Hz to 50 Hz • 0.2 % of scale from 50 Hz to 125 Hz • 1 % of scale otherwise |
| Count function (C.A 1727) |
Range : 0 to 100,000 events
Accuracy: ± 1 event |
| Power supply |
9 V |
| Battery life |
250 x 5 min measurements with optical sensor
600 x 5 min measurements with external sensor |
| Memory (C.A 1727) |
4,000 points |
| Dimensions |
21 x 72 x 47 mm |
| Weight |
250g |
| Leakproofing |
IP 51 |
| Environment |
Storage : -20 to 70 °C, 95%RH
Operation : 0 to 55 °C, 90%RH |
| Optical |
Reflective area : 10 to 90% of the target area.
Measurement distance : 1 to 50 cm. The maximum distance is given for reflective adhesive strip with a minimum area of 10 cm2.
Measurement angle : ± 15° in relation to the perpendicular of the reflective surface. |
| Mechanical |
Mechanical adapter |
End-fittings : elastomer with a hardness of 80 shores
Pressure on moving part : between 2 and 40 N.
Maximum speed : 10,000 rpm.
Service life : approx 1,000 hours at 3000 rpm with a pressure of 20 N. |
| Conical end- fitting accessory |
Minimum diameter of measurement shaft : 5 mm. |
| Cylindrical end-fitting accessory |
Speed measurements on shaft with a diameter greater than 5 mm or flat-ended shafts |
| End-fitting accessory with wheel |
Wheel diameter : 30.183 mm
Wheel development : 10 cm ± 0.1 mm |
