สวิทช์จับความเคลื่อนไหวของคน MOTION METER
รุ่น EOC-IR 369C NT
คุณลักษณะ
- Presence detector (PIR)
- Square detection area
- Genuine daylight measurement
- Light switch output (relay 230V)
- Presence switch output (relay, potential-free)
- Automatic control of light and HVAC as well as room monitoring function
- Lighting control with light threshold value and self-learning switch-off delay
- Choice of fully or semi automatic operation
- Sensor or switch options for manual switching
- Pulse function for staircase time switch
- Inrush current limitation for EB
- HVAC control with switch-on and switch-off delay
- Room monitoring with selective movement detection - Fully or semi-automatic In Fully automatic mode the lighting switches on and off automatically according to presence and light In "Semi-automatic" mode, it must be switched on manually switches off automatically
- Manual override The light can be manually switched on or off at any time via sensors or switches
- Room/corridor sensor function In the "corridor" setting the detector functions as a staircase time switch and it cannot be switched off manually
- The pulse function is for controlling a staircase time switch
- The inrush current limitation makes the presence detector particularly suitable for switching electronic ballasts (EBs) - The presence detector has Genuine daylight measurement and is only suitable for switching fluorescent lamps (FL/PL)
- Presence switch contact for HVAC control The switching behaviour of the potential-free contact is only controlled by presence
- The switch-on delay prevents instantaneous switch on The contact only closes on completion of the switch-on delay - The sensitivity of the presence switch outputis reduced in the monitoring position. The contact indicates the presence of people with a high degree of cetainty
- Master/slave parallel switching Up to ten detectos can be connected with each other detectors merely provide presence information as slaves - Device can be connected as master or slave
- Test operation mode checks the detection area and installation
- A maximum of 10 detectos can be switched at the same time
- The switching behaviour of the presence detector is controlled by presence and light
- The self-learning switch-off delay adjusts to occupants behaviour - The square detection area allows accurate and simple planning
คุณสมบัติ
| MODEL | ECO-IR 360C NT |
|---|---|
| Operating voltage | 230VAC |
| Frequency | 50Hz |
| Recommended installation height | 2-3.5mm |
| Installation type | Ceiling installation |
| Power consumption | 0.9W |
| Light measurement | Genuine daylight measurement |
| Setting range brightness | 10-1500lx |
| Light switch-off delay | 10s - 20min |
| Type of contact light | Relay 230V, switch-on current limit |
| Lamps | fluorescent lamps |
| Compact and flourescent lamps | max 1400VA |
| Compact and flourescent lamps (NUmber of electronic ballasts) |
16x(1x58W), 8x(2x58W), 24x(1x36W), 12x(2x36W), 24x(smaller than 36W) |
| Switch-on delay presence | 0s - 10min |
| Presence switch-off delay | 10s - 120min |
| Type of conteact presence | Relay potential-free |
| Switching capacity presence | 100W(50VDC), 460VA(230VAC), minimal 10V/100mA |
| Switching output | Potential-free |
| Type of connection | Spring terminals |
| Max cable cross section | 1.5mm2 |
| Mounting plate | 70x70mm |
| Size of concraled housing | Ø 55m (NIS, PMI) |
| Ambient temperature | 0 to 50°C |
| Protection class | II according to EN 60 730-1 |
| Type of protection | IP40 |
