เครื่องนับจำนวนแบบดิจิตอล Digital Counter
รุ่น 54P Series
คุณลักษณะ
The Codix 54P is a voltage-powered pulse counter/ position display with 4 different count input modes and separate tachometer. With separate inputs, for fast and slow count pulses, with 6-digit LED display for NPN, PNP input signals.
- Fast count and frequency input – input frequency max. 30 kHz (can be damped to 30 Hz for mechanical contacts).
- Robust housing – IP65 protected.
- Very bright LED display, 14 mm high, 6 digits.
- Very accurate precise frequency measurement principle (HRA-High Rate Accuracy System) Frequencies up to 38 Hz are calculated using time-interval (period duration) measurement. Frequencies > 38 Hz are calculated using a special time base (gate time) measurement. A very high accuracy of < 0.1 % is achieved, even with very short gate times. The resulting measurement is available after a max. of 50 ms.
- Short start-up time – detects input pulses just 16 msec after being switched on => no pulses are lost with a simultaneous motor start-up.
- Large keys – can also be operated when wearing gloves.
- Programming
- Simple uniform menu-driven programming and operation.
- Possible to enter the programming also during operation with a confirmation prompt.
- Pressing the right key switches between displays.
- Individually programmable scaling: multiplication and division factor (0.0001…99.9999), to display corresponding engineering units, e.g. position in 1/10 mm and speed in RPM.
- Separate factors for frequency and pulse counting.
- 4 different count input modes for the position display: 2-channel input for detecting count direction, difference or adding mode, quadrature x1, x2 or x4. 1 separate input for rotary speed and speed, display in 1/min or 1/sec.
- AC or DC supply with sensor power supply.
- Inputs : as an alternative to the HTL inputs, devices with a 5 V DC input level are available, for use as parallel displays for PLCs.
คุณสมบัติ
| MODEL | 54P / CODIX 54P |
|---|---|
| Display | 6 digit, red 7 segment LED display; 14 mm (0.55“) high |
| Data backup | EEPROM |
| Operating temperature | 20 to 65°C (-4 to 149°F) (non-condensing) |
| Storage temperature | -25 to 70°C [-13 to 158°F] |
| Altitude | up to 2000 m (6562‘) |
| Power supply | 10 ... 30 VDC, with reverse polarity protection 100 ... 240 V AC, ±10 % |
| Current consumption | max. 50 mA, 6 VA |
| EMC standards | EN 55011 class B, EN 61000-6-2, EN 61000-6-3 |
| Device safety : designed to | EN 61010 part 1 |
| Device safety : protection class | 2 |
| Device safety : application area | pollution level 2 |
| UL approval | file E128604 |
| Housing | front panel mount 96 x 48mm (3.74 x 1.89“) acc. to DIN 43700; RAL 7021, dark grey |
| Protection | IP65 (front side) |
| Weight | approx. 150 g [5.29 oz] |
| Polarity of inputs | programmable, NPN or PNP for all inputs |
| Input resistance | approx. 5 kΩ |
| Counting frequency 1) | max. 30 kHz, can be damped to 30 Hz |
| Display range | tachometer 1/min or 1/sec |
| Minimum pulse duration of the reset input | 5 ms |
| Input switching level standard version (HTL) DC power supply |
Low : 0 ... 0.2 x UB (VDC) High : 0.6 x UB ... 30 VDC |
| Input switching level standard version (HTL) AC power supply |
Low : 0 ... 4 VDC High : 12 ... 30 VDC |
| Input switching level at 4 ... 30 VDC | Low : 0 ... 2 VDC High 4 ... 30 VDC |
| Accuracy | frequency meter/tachometer < 0.1 % |
| Sensor power supply (AC version) | 24 V DC ±15 %/100 mA |
