| Display |
Digital Display |
48 x 48 |
PV red 7 segment LED, 4 figure (height of character about 12 mm) |
| SV green 7 segment LED, 4 figures (height of character about 9 mm) |
| Status Display |
RUN (green), PRG (green), AT (green), OUT 1(green) EV1 (yellow), EV2 (yellow), OUT2 /EV3 (yellow) |
| Display accuracy |
±(0.25%FS+1digit) CJ errors not included, B thermo couple below 400℃ is not guaranteed. Display accuracy during EMC examination is ±5%FS. |
| Accuracy maintenance range |
23±5℃ |
| Display range |
-10%-110% of measuring range, but Pt100's -200~600℃ is -240～680℃ |
| Display resolution |
Changes with measuring range and scaling. |
| Input scaling |
Possible at the time of voltage input and current input -1999 to 9999 (spang 10 to 10000 count, decimal point position no decimal point 0.1, 0.01, 0.001) |
| Data save |
Nonvolatile memory (EEPROM) |
| Temporary dead time |
No influence within 0.02 second 100% dip |
| Use environmental condition |
Temperature |
-10 to 55 ℃ |
| Humidity |
Below 90%RH (no dew condensation) |
| Hight |
Altitude of 2000m or less |
| Category |
Ⅱ |
| Contamination degree |
2 |
| Storage temperature Conditions |
-20 to 65 ℃ |
| Supply voltage |
90 to 264V AC 50/60Hz or 21.6 to 26.4V AC (50/60Hz)/DC |
| Power consumption |
90 to 264V AC maximum 9VA 21.6 to 26.4V AC maximum 6 VA 21.6 to 26.4V DC maximum 4W |
| Applicable |
standard |
EU CE marking directives compliant (EMC : Class A) |
| Oscillation |
IEC60068-2-6 |
| Insulated class |
Class I apparatus |
| Input noise removal ratio |
Normal 50dB or higher |
| Impulse-proof noise |
Power-source Normal 100 ns / 1μs ±1500 V |
| Insulation resistance |
- Between input/output terminal and power supply terminal 500V DC 20Ω or higher
- Between analog output or communication and other input/output terminals 500V DC 20Ω or higher |
| Withstand voltage |
- Between input/output terminal and power supply terminal 1500V AC 1 minute or 1800V AC 1 second
- Between analog output or communication and other input/output terminals 500V AC 1 minute or 600V AC 1 second |
| Resistance to vibration |
Frequency 10～55～10Hz, amplitude 0.75mm (one side amplitude ) 100m/s2 Direction 3 directions Sweep speed 1 octave/minute (about 5 minutes for both-way / cycle) Number of sweep 10 times |
| Case material |
PC or PPE |
| Case color |
Light gray |
| Outside dimension (W x H x D) |
48 x 48 x 66 mm (depth in panel 62 mm) |
| Thickness of applied panel |
1.2 - 2.8 mm |
| Weight |
MAC3D ： About 120 g |
