เซนเซอร์แปลงความดัน Pressure Transmitter
รุ่น SMS
คุณลักษณะ
ADZ NAGANO GmbH introduces the new pressure transmitter series “SMS“ based on its proven stainless steel cell. Being both short and compact in design, combined with precision and a long lifecycle, it sets new standards in the field of fully electronic pressure-measuring technology. A hermetically welded thin-film cell (Poly-Si) in steel housing and, therefore, extremely robust, despite its tiny design. Commercial OEM-integrated plug-variants, Packard, 4-pin Deutsch, AMP-Super Seal, Junior-Timer, M12 series and cable variants can be obtained. Output signals from 4 to 20 mA (two-leads), 0 to 10 V, 1 to 5 V as well as 0.5 to 4.5 V ratiometric are available as a standard ADZ NAGANO is certified acc. to TS16949. As a matter of course, custom-made adjustments are possible with this product.
- Measuring range from 0…4 bar and to 0…600 bar
- Fully welded, vacuum-proof stainless steel membrane
- Shock-proof and vibration-proof > 1000 g shock, > 20 g vibration
- Designed for OEM quantities and, therefore, available at a very reasonable price-performance ratio
- Extremely short design (thread G1/4 with M12 plugs smaller than 50 mm in total length)
| PRESSURE RANGE | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Measuring range* | p [bar] | 4 | 6 | 10 | 16 | 20 | 25 | 40 | 60 |
| - Overload pressure | p [bar] | 10,0 | 20,0 | 20,0 | 40,0 | 40 | 100 | 100 | 200 |
| - Burst pressure | p [bar] | 15,0 | 30,0 | 30,0 | 60,0 | 60 | 150 | 150 | 300 |
| Measuring range* | p [bar] | 100 | 160 | 200 | 250 | 400 | 600 | ||
| - Overload pressure | p [bar] | 200 | 400 | 400 | 750 | 750 | 840 | ||
| - Burst pressure | p [bar] | 300 | 600 | 600 | 1.000 | 1.000 | 1.050 | ||
| ELEVTRICAL PARAMETER | |||||||
|---|---|---|---|---|---|---|---|
| signal | US [VDC] | RL [KΩ] | RA[Ω] | ||||
| Output signal* and | RA in Ω | 4...20 mA | (2-wire, 3-wire) | 9...32 | nach RA ≤(US-10V)/0,02A | ||
| Maximum acceptable burden | RA | 0...10VDC | (3-wire) | 12...32 | >5,0 | ||
| 0...5VDC | 8...32 | >2,5 | |||||
| 1...5VDC | 8...32 | >2,5 | |||||
| 0,5...4,5VDC | ratiometric | 5±10% | >4,7 | ||||
| Response time*(10-90%) | t [ms] | <1 | |||||
| Withstand voltage | U [VDC] | 350 | (option 710) | ||||
| ACCURACY | ||||||
|---|---|---|---|---|---|---|
| % of the rang | ≤ 0,50** | option ≤ 0,25 | **incl. nonlinearity, hysteresis, repeatability, zero-offset and final-offset (acc. to IEC 61298-2) |
|||
| BFSL | ≤ 0,125 | |||||
| Non-linearity | % of the rang | ≤ 0,15 | ||||
| Repeatability | % of the rang | ≤ 0,10 | ||||
| Stability/year | % of the rang | ≤ 0,10 | ||||
| ACCEPTABLE TEMPERATURE RANGE | |||
|---|---|---|---|
| Measuring medium | T [°C] | -40...125 | |
| Ambience | T [°C] | -40...105 | |
| Storage | T [°C] | -40...125 | |
| Compensated range* | T [°C] | -20...85 | |
| Temperature coefficient within the compensated range | |||
| Mean TC offset | % of the range | ≤ 0,15/10K | |
| Mean TC range | % of the range | ≤ 0,15/10K | |
| Total error | % of the range | -40°C 2,00% | |
| % of the range | 105°C 2,00% | ||
| MECHANICAL PARAMETER | ||||
|---|---|---|---|---|
| Parts in contact with the measuring medium | stainless steel | |||
| Housing | stainless steel | |||
| Shock resistance | g | 1000 | acc. to IEC 68-2-32 | |
| Vibration resistance | g | 20 | acc. tp IEC 68-2-6 and IEC 68-2-36 | |
| Mass | m [g] | approx. 60 | (depending on design) | |
| CE-conformity | EC Directive 89/336/EWG | |||
| IP system of protection | The IP system of protection as specified in the data sheets generally applies, with their mating plug connected. Relative pressure transmitters usually require a ventilated mating plug and/or cable to aloow for pressure compensation. From a pressure range of 60bar, a centilated mating plug and/or cable is not necessarily required. | |||
| *others upon request | ||||
