สวิทช์จับความเคลื่อนไหวของคน MOTION METER
รุ่น EOC-IR 369C NT

คุณลักษณะ

• Presence detector (PIR)
• Square detection area
• Genuine daylight measurement
• Light switch output (relay 230V)
• Presence switch output (relay, potential-free)
• Automatic control of light and HVAC as well as room monitoring function
• Lighting control with light threshold value and self-learning switch-off delay
• Choice of fully or semi automatic operation
• Sensor or switch options for manual switching
• Pulse function for staircase time switch
• Inrush current limitation for EB
• HVAC control with switch-on and switch-off delay
  - Room monitoring with selective movement detection
• Fully or semi-automatic In Fully automatic mode the lighting switches on and off automatically according to presence and light In "Semi-automatic" mode, it must be switched on manually switches off automatically
  - Manual override The light can be manually switched on or off at any time via sensors or switches
  - Room/corridor sensor function In the "corridor" setting the detector functions as a staircase time switch and it cannot be switched off manually
  - The pulse function is for controlling a staircase time switch
  - The inrush current limitation makes the presence detector particularly suitable for switching electronic ballasts (EBs)
• The presence detector has Genuine daylight measurement and is only suitable for switching fluorescent lamps (FL/PL)
  - Presence switch contact for HVAC control The switching behaviour of the potential-free contact is only controlled by presence
  - The switch-on delay prevents instantaneous switch on The contact only closes on completion of the switch-on delay
• The sensitivity of the presence switch outputis reduced in the monitoring position. The contact indicates the presence of people with a high degree of cetainty
  - Master/slave parallel switching Up to ten detectos can be connected with each other detectors merely provide presence information as slaves
• Device can be connected as master or slave
• Test operation mode checks the detection area and installation
• A maximum of 10 detectos can be switched at the same time
  - The switching behaviour of the presence detector is controlled by presence and light
  - The self-learning switch-off delay adjusts to occupants behaviour
• The square detection area allows accurate and simple planning