เครื่องนับจำนวนแบบดิจิตอล

เครื่องนับจำนวนแบบดิจิตอล
Digital Counter รุ่น 52P Series

คุณลักษณะ

เป็นเครื่องนับจำนวนแบบดิจิตอล

เครื่องนับจำนวนแบบดิจิตอล Digital Counter
รุ่น 54U Series

คุณลักษณะ

The Codix 54U is a voltage-powered dual function counter with 4 functions in one device: Counter with 2 totalizing ranges, totalizer and timer, totalizer and frequency meter, timer with 2 time ranges. For fast and slow count pulses, with 6-digit LED display for NPN, PNP input signals.

• Fast count and frequency input – input frequency max. 60 kHz (can be damped to 30 Hz for mechanical contacts).
• Robust housing – IP65 protected.
• Very bright LED display, 14 mm high, 6 digits.
• Very accurate precise frequency measurement principle (HRA-High Rate Accuracy System) Frequencies up to 38 Hz are calculated using time-interval (period duration) measurement. Frequencies > 38 Hz are calculated using a special time base (gate time) measurement. A very high accuracy of < 0.1 % is achieved, even with very short gate times. The resulting measurement is available after a max. of 50 ms.
• Short start-up time – detects input pulses just 16 msec after being switched on => no pulses are lost with a simultaneous motor start-up.
• Large keys – can also be operated when wearing gloves.
• Programming
  • Simple uniform menu-driven programming and operation.
  • Possible to enter the programming also during operation with a confirmation prompt.
  • Pressing the right key switches between displays.
• Individually programmable scaling: multiplication and division factor (0.0001…99.9999), to display corresponding engineering units, e.g. position in 1/10 mm and speed in RPM.
• Separate factors for frequency- and pulse counting.
• AC or DC power supply.
• Inputs : as an alternative to the HTL inputs, devices with a 5 VDC input level are available, for use as parallel displays for PLCs.
• Timer specials: timer or hours-run meter with various Start /Stop measurements, time range settings in hours, minutes or seconds, with decimal point. Resolutions up to 1/1000 can be programmed.

เครื่องนับจำนวนแบบดิจิตอล
Digital Counter รุ่น 52U Series

คุณลักษณะ

เป็นเครื่องนับจำนวนชื้นงาน LED Multifunction Counter Codix 52U

เครื่องนับจำนวนแบบดิจิตอล Digital Counter
รุ่น 544 Series

คุณลักษณะ

The Codix 544 is a voltage-powered multifunction counter with 4 functions in one device : Pulse, position, frequency and speed display, timer and short time meter. With 6-digit LED display for NPN, PNP input signals.

• Fast count and frequency input – input frequency max. 60 kHz (can be damped to 30 Hz for mechanical contacts).
• Robust housing – IP65 protected.
• Very bright LED display, 14 mm high, 6 digits.
• Very accurate precise frequency measurement principle (HRA-High Rate Accuracy System) Frequencies up to 38 Hz are calculated using time-interval (period duration) measurement. Frequencies > 38 Hz are calculated using a special time base (gate time) measurement. A very high accuracy of < 0.1 % is achieved, even with very short gate times. The resulting measurement is available after a max. of 50 ms.
• Short start-up time – detects input pulses just 16 msec after being switched on => no pulses are lost with a simultaneous motor start-up.
• Large keys – can also be operated when wearing gloves.
• Programming
  • Simple uniform menu-driven programming and operation.
  • Possible to enter the programming also during operation with a confirmation prompt.
• Individually programmable scaling: multiplication and division factor (0.0001…99.9999), to display corresponding engineering units, e.g. position in 1/10 mm and speed in RPM.
• 4 different count input modes: 2-channel count input for detecting count direction, difference or adding mode, quadrature with x1, x2 or x4 evaluation.
• Frequency measurement: display in 1/min or 1/sec.
• Time counting: pulse width or time interval measurement in hours, minutes or seconds, as well as real-time display.
• AC or DC power supply.
• Inputs: as an alternative to the HTL inputs, devices are available with a 5 V DC input level, for use as parallel displays to PLCs.
• Optional output: zero signal for position and count, zero speed monitoring, 1 Hz clock pulse for active time measurement.