เครื่องนับจำนวนแบบดิจิตอล

เครื่องนับจำนวนแบบดิจิตอล
Digital Counter รุ่น 524 Series

คุณลักษณะ

The Codix 524 is a power-supplied multifunction counter with 3 functions in one device: Pulse and position display, frequency and speed display, time counter and short time meter for fast and slow counting pulses. With 6-digit LED display for NPN, PNP input signals

• Very bright LED display, 14 mm high.
• Fast count and frequency input – input frequency max. 60 kHz
(can be damped to 30 Hz for mechanical contacts).
• Robust housing – IP65 protected.
• Very bright LED display, 8 mm high, 6 digits.
• Very accurate precise frequency measurement principle (HRA-High Rate Accuracy System) Frequencies up to 38 Hz are calculated using time-interval (period duration) measurement. Frequencies > 38 Hz are calculated using a special time base (gate time) measurement. A very high accuracy of < 0.1 % is achieved, even with very short gate times. The resulting measurement is available after a max. of 50 ms.
• Short start-up time – detects input pulses just 16 msec after being switched o

เครื่องนับจำนวนแบบดิจิตอล Digital Counter
รุ่น 541 Series

คุณลักษณะ

The Codix 541 is a voltage powered pulse counter / position display with 4 count input modes: count direction, difference, addition, quadrature (phase discriminator) x1, x2 and x4, for fast and slow count pulses, with 6-digit LED display for NPN, PNP input signals.

• Fast count input – input frequency max. 60 kHz.
• Robust housing – IP65 protected.
• Very bright LED display, 14 mm high.
• Position, difference, adding or count direction detection
  • programmable for positive (PNP) or OV (NPN) switching input pulses.
  • - fast count input with an input frequency of max. 60 kHz, can be damped to 30 Hz for mechanical contacts.
• Short start-up time – detects input pulses just 16 msec after being switched on => no pulses are lost with a simultaneous motor start-up.
• Large keys – can also be operated when wearing gloves.
• Simple uniform menu-driven programming and operation – possible to enter the programming also during operation with a confirmation prompt.
• Individually programmable scaling: Multiplication and division factor (0.0001…99.9999), to display corresponding engineering units, e.g. position in 1/10 mm or packaging units.
• 4 different count input modes: 2-channel count input for detecting count direction, difference or adding mode, quadrature with x1, x2 or x4 evaluation.
• Freely programmable setpoint.
• AC or DC power supply with sensor power supply.
• As an alternative to the HTL inputs, devices are available with a 4 ... 30 V DC input level, for use as parallel displays to PLCs.
• Optional output - as zero signal.

เครื่องนับจำนวนแบบดิจิตอล Digital Counter
รุ่น 521 Series

คุณลักษณะ

The Codix 521 is a voltage powered pulse counter / position display for fast and slow count pulses, with 6-digit LED display for NPN, PNP input signals.

Equipped with 4 count input modes: count direction, difference, addition, quadrature (phase discriminator) x1, x2 and x4.

• Fast count input – input frequency max. 60 kHz.
• Robust housing – IP65 protected.
• Very bright LED display, 8 mm high
• Position, difference, adding or count direction detection
  • programmable for positive (PNP) or OV (NPN) switching input pulses.
  • fast count input with an input frequency of max. 60 kHz, can be damped to 30 Hz for mechanical contacts.
• Short start-up time – detects input pulses just 16 msec after being switched on => no pulses are lost with a simultaneous motor start-up.
• Large keys – can also be operated when wearing gloves.
• Simple uniform menu-driven programming and operation
  • possible to enter the programming also during operation with a confirmation prompt
• Individually programmable scaling : Multiplication and division factor (0.0001…99.9999), to display corresponding engineering units, e.g. position in 1/10 mm or packing units.
• • 4 different count input modes : 2-channel count input for detecting count direction, difference or adding mode, quadrature with x1, x2 or x4 evaluation.
• Freely programmable setpoint.
• As an alternative to the HTL inputs, devices are available with a 4 ... 30 V DC input level, for use as parallel displays to PLCs.
• Optional output - as zero signal.

เครื่องนับจำนวนแบบดิจิตอล
Digital Counter รุ่น 142 Series

คุณลักษณะ

เป็นเครื่องนับจำนวนชื้นงาน LCD Service Counter Codix 142